Changing the code on a Haslet Gates & Garage Doors keypad is a relatively simple process that allows you to enhance the security of your garage. This process involves reprogramming the keypad with a new access code.

Here’s a comprehensive guide on how to change the code on a garage door keypad:

Materials You’ll Need:

  • Garage door keypad
  • Current access code (if applicable)
  • New access code
  • Step stool or ladder (if needed)
  • Garage door opener manual (for specific instructions)

Step-by-Step Guide:

1. Locate the Programming Button:

  • Identify the programming button on your garage door opener motor unit. This button is often located near the motor unit’s indicator lights and may be color-coded, such as green, purple, yellow, or another color.

2. Access Keypad Programming Mode:

  • On the garage door keypad, locate the “Program,” “Learn,” or “Set” button. Press and hold this button until the indicator light on the keypad begins to blink, indicating that the keypad is ready for programming.

3. Enter the Current Access Code (if applicable):

  • If your keypad is already programmed with an access code, you may need to enter the current code to confirm your authority to make changes. Enter the current access code and then press the “Program,” “Learn,” or “Set” button again.

4. Enter the New Access Code:

  • After confirming the current code (if needed), enter the new access code you want to set for your garage door. Be sure to choose a code that is easy for you to remember but not easily guessable.

5. Confirm the New Access Code:

  • Enter the new access code a second time to confirm that you’ve entered it correctly. This step helps avoid programming errors.

6. Press the “Program” or “Enter” Button:

  • Press the “Program,” “Enter,” or “Learn” button on the garage door keypad to finalize the programming process. This action sends the new code to the garage door opener unit.

7. Observe the Indicator Lights:

  • Look at the indicator lights on the garage door opener motor unit. They may flash, blink, or change in some way to indicate that the new code has been successfully programmed.

8. Test the New Code:

  • Test the new access code by entering it on the keypad and pressing the “Enter” button. The garage door should respond by opening or closing.

9. Store the New Code Securely:

  • Store the new access code in a secure location that is easily accessible to you. You might want to write it down and keep it in a safe place in case you forget it.

10. Retain the Manual:

  • Keep your garage door opener manual handy for future reference. It contains valuable information about programming and operating your specific garage door opener model.

11. Seek Professional Help (if needed):

  • If you encounter difficulties during the programming process or if the keypad isn’t responding as expected, consider seeking assistance from a professional garage door technician or referring to the manufacturer’s customer support.

Conclusion:

Changing the code on a Haslet Gates & Garage Doors keypad is a straightforward process that enhances the security of your garage. By following the steps outlined above and referring to your garage door opener manual for specific instructions, you can successfully program a new access code and ensure secure and convenient access to your garage. Always prioritize safety and choose a code that is not easily guessable to maintain the security of your property.

Haslet Gates & Garage Doors

817-242-5042