Texas Business Listing Directories

Local Businesses Blog in Texas

Tag: Garage Door Repair North Richland Hills TX

How Much To Install A Roller Garage Door – Tarrant County Door & Gate

By

On March 29, 2024

In GARAGE DOOR SUPPLIER

Garage Door Repair North Richland Hills TX can provide numerous benefits, including space-saving design, smooth operation, and enhanced security.

However, if you’re considering this upgrade, you may be wondering about the associated costs. In this comprehensive guide, we’ll explore various factors that influence the cost of installing a roller garage door and provide valuable insights to help you budget effectively.

Understanding Roller Garage Doors

Before delving into costs, let’s briefly review what roller garage doors entail:

A roller garage door consists of horizontal slats or panels that roll up and down along tracks installed on the inside of the garage opening. This design allows for efficient use of space both inside and outside the garage, making roller doors ideal for properties with limited driveway space or where maximizing garage space is essential.

Factors Affecting Installation Costs

Several factors influence the cost of installing a roller garage door:

  • Door Material: Roller garage doors are typically made of steel or aluminum, with steel doors being more durable and costly than aluminum ones.
  • Door Size: The size of your garage opening will affect the cost of the door and installation. Larger doors require more materials and labor.
  • Automation: Opting for a motorized roller door with remote control operation adds to the overall cost but enhances convenience.
  • Insulation: Insulated roller doors offer better energy efficiency and noise reduction but may cost more upfront.
  • Additional Features: Features such as built-in lighting, battery backup, or advanced security systems can increase the overall cost.
  • Labor Rates: Installation costs vary depending on the contractor’s rates, location, and level of expertise.

Average Cost of Roller Garage Door Installation

The cost of installing a roller garage door can vary widely depending on the factors mentioned above. On average, homeowners can expect to pay:

  • Basic Installation: For a standard single roller garage door with manual operation and no additional features, the cost typically ranges from $800 to $1,500.
  • Custom Installation: For a custom or high-end roller door with premium materials, automation, insulation, and additional features, the cost can range from $1,500 to $3,500 or more.

DIY vs. Professional Installation

While some homeowners may consider a DIY installation to save money, it’s essential to weigh the pros and cons:

  • DIY Installation: DIY installation can save on labor costs, but it requires technical skills, specialized tools, and knowledge of local building codes. Improper installation can compromise security and functionality.
  • Professional Installation: Hiring a professional ensures proper installation, warranty coverage, and peace of mind. While it adds to the overall cost, professional installation reduces the risk of issues down the line.

Tips for Cost-Saving

To minimize the cost of roller garage door installation, consider the following tips:

  • Choose a Standard Model: Opt for a standard roller door style and material without unnecessary features to keep costs down.
  • Reuse Existing Hardware: If your existing garage door hardware is in good condition, you may be able to save on installation costs by reusing it with the new roller door.
  • Shop Around: Obtain quotes from multiple contractors to compare prices and services offered, ensuring you get the best value for your money.

Conclusion:

Garage Door Repair North Richland Hills TX can improve convenience, security, and curb appeal while maximizing garage space. By understanding the factors influencing installation costs and following the tips outlined in this guide, you can ensure a smooth and cost-effective installation process.

Tarrant County Door & Gate

6408 Marlette Ct, Fort Worth, TX 76182, United States

1-817-456-2958

Storm Damage and Your Garage Door: Expert Repairs and Solutions – NRH’s Gates & Garage Doors

By

On October 23, 2023

In Garage Door

Living in an area prone to storms has its challenges, and as a homeowner, I’ve had my fair share of experiences dealing with storm damage. However, when a severe storm hit my neighborhood, I was unprepared for the extent of the damage it would cause to my garage door.

In referenced to Garage Door Repair North Richland Hills TX, I’ll share my personal experience and the invaluable lessons I learned from garage door experts on dealing with storm damage, repairs, and solutions.

The Unpredictable Fury of Storms

As a resident of a storm-prone area, I’m accustomed to preparing for heavy rains and gusty winds. But not all storms are created equal, and one fateful evening, a particularly powerful storm swept through my neighborhood. The thunder rumbled, and the wind howled as I watched from the safety of my home. Little did I know the extent of the damage that awaited me outside.

When I finally ventured out the following morning, I was met with a startling sight. My garage door, which had stood strong for years, bore the brunt of the storm’s fury. It was partially dented, twisted, and barely functional. It was a disheartening moment.

Seeking Expert Guidance

The damage was beyond what I could handle on my own. I knew it was time to turn to the experts, so I contacted a professional garage door repair service. The technician who arrived was not only skilled but also sympathetic to the challenges I was facing. He shared insights and solutions that I believe every homeowner should be aware of when dealing with storm-damaged garage doors.

Assessing the Damage

The first step in addressing storm damage is a thorough assessment. The technician inspected the garage door carefully, noting the extent of the damage. He explained that storm damage to garage doors can manifest in various ways, including:

1. Dents and Dings: High winds and flying debris can cause visible dents and dings on the door panels. These cosmetic issues, while unsightly, are often fixable.

2. Warping and Twisting: Severe storms can twist or warp the tracks and panels of a garage door, affecting its functionality. These issues require immediate attention to ensure the door operates safely.

3. Electrical and Mechanism Damage: Lightning strikes or power surges during storms can damage the electrical components and mechanisms of the garage door, rendering it non-operational.

Key Insights from the Expert

Here are the crucial insights I gained from the garage door expert:

1. Safety First: If your garage door is damaged, especially if it’s partially open or inoperable, it poses a safety risk. Attempting to force it open or closed can lead to accidents. It’s essential to keep safety in mind and avoid using the door until it’s repaired.

2. Cosmetic vs. Structural Damage: Not all storm damage is equal. Cosmetic damage like dents and dings, while unsightly, may not affect the functionality of the door. Structural damage, on the other hand, can impede the door’s operation and should be addressed promptly.

3. Repair vs. Replacement: Whether to repair or replace a storm-damaged garage door depends on the extent of the damage. Small dents and dings can often be repaired, but severe warping or twisting may necessitate door replacement.

4. Electrical and Mechanism Repairs: If your garage door’s electrical components or mechanisms are damaged, it’s essential to have them repaired by a professional. Attempting DIY repairs in these cases can be hazardous.

The Repair Process

In my case, the technician determined that the damage was severe enough to warrant a garage door replacement. This decision was based on the warping and twisting of the door panels, which compromised its structural integrity. I was initially apprehensive about the cost and the time it would take to replace the door, but the technician explained the benefits of a new, storm-resistant door.

Benefits of a Storm-Resistant Garage Door

  1. Enhanced Durability: Modern garage doors are designed to withstand the elements. They are constructed with reinforced materials that can withstand high winds and impact from debris.
  2. Improved Insulation: Storm-resistant doors often come with improved insulation, helping to maintain a more consistent temperature in your garage, which can be especially beneficial if you use the space as a workshop or for storage.
  3. Peace of Mind: Knowing that your garage door is designed to withstand storms provides peace of mind during severe weather events.

Storm-Resistant Garage Door Features

The expert introduced me to the features of storm-resistant garage doors, which include:

  1. Impact-Resistant Panels: These panels are built to withstand impacts from debris without warping or denting.
  2. High Wind Ratings: Storm-resistant doors are rated to withstand high wind speeds, ensuring they stay in place during storms.
  3. Reinforced Tracks and Springs: The tracks and springs are designed to withstand the extra pressure from high winds and debris impacts.
  4. Sealed Edges: Storm-resistant doors often come with weather sealing to prevent rain and wind from infiltrating your garage.

Conclusion

Dealing with storm damage to your garage door can be a challenging and unexpected situation. In my experience, seeking expert guidance and understanding the options for repair or replacement are crucial steps in the recovery process. Storm-resistant garage doors offer a durable, long-term solution, providing not only protection during storms but also enhanced insulation and peace of mind.

Overall, according to Garage Door Repair North Richland Hills TX, it’s essential for homeowners in storm-prone areas to be prepared for such events, both in terms of safety measures and property protection. While the experience was initially disheartening, it ultimately led to a valuable lesson in ensuring the resilience of my home and the security of my family during future storms.

NRH’s Gates & Garage Doors

7048 Ridge Crest Dr, North Richland Hills, TX 76182, United States

817-533-4913

How To Install Garage Door Stop Moulding – NRH’s Gates & Garage Doors

By

On September 29, 2023

In GARAGE DOOR SUPPLIER

Installing Garage Door Repair North Richland Hills TX is a straightforward DIY project that can help improve the energy efficiency of your garage and keep out drafts, pests, and moisture.

In this guide, we’ll walk you through the steps to install garage door stop molding.

Materials You’ll Need:

  1. Garage door stop molding (purchase enough to go around the perimeter of your garage door)
  2. Measuring tape
  3. Saw (miter saw or hacksaw)
  4. Carpenter’s pencil
  5. Caulk gun and exterior caulk
  6. Screwdriver
  7. Screws or nails (appropriate for your garage door material)
  8. Hammer
  9. Safety glasses
  10. Protective gloves

: Gather Your Materials and Safety Gear

Before you start, make sure you have all the necessary materials and safety gear. Safety glasses and gloves are essential to protect yourself during the installation process.

: Measure and Cut the Molding

Start by measuring the perimeter of your garage door to determine how much molding you’ll need. Add a few extra inches for safety. Use a measuring tape and a carpenter’s pencil to mark the measurements on the molding.

Next, use a saw (miter saw for precise cuts, or a hacksaw for a simpler approach) to cut the molding to the correct lengths. Make sure to cut the ends at 45-degree angles for clean and professional-looking corners.

: Prep the Garage Door

Inspect the garage door frame to ensure it’s clean and dry. If there are any gaps or holes, fill them with caulk and let it dry before proceeding.

: Install the Top Piece

Begin with the top piece of molding. Position it at the top of the garage door frame, making sure it’s flush with the exterior edge. Use a screwdriver to secure it in place with screws or nails. Space the fasteners evenly, about every 12-18 inches, depending on the size of your molding.

: Install the Side Pieces

Now, move on to the side pieces. Start with one side. Position the molding flush with the exterior edge of the garage door frame, aligning it with the top piece you installed earlier. Secure it with screws or nails as you did with the top piece.

Repeat the process for the other side.

: Install the Bottom Piece

Finally, install the bottom piece of molding. Align it with the side pieces and the bottom of the garage door frame. Secure it with screws or nails, just like you did with the other pieces.

: Fill Gaps with Caulk

Inspect the corners and seams of the molding. If there are any gaps or spaces between the molding and the garage door frame, use a caulking gun to apply exterior caulk. Smooth the caulk with a wet finger or a caulk smoothing tool for a neat finish.

: Finish and Test

Allow the caulk to dry completely before testing your newly installed garage door stop molding. Close the garage door and check for any drafts or gaps around the edges. If necessary, you can make additional caulk adjustments to seal any remaining gaps.

: Cleanup

Clean up your work area, disposing of any scraps and materials properly. Remove any protective coverings from your garage door and surrounding surfaces.

: Maintenance

Regularly inspect your garage door stop molding for signs of wear or damage. If you notice any issues, such as cracks or gaps, repair or replace the molding as needed to maintain its effectiveness.

Installing Garage Door Repair North Richland Hills TX can help improve the energy efficiency of your garage, protect against pests and drafts, and enhance the overall appearance of your garage door. With the right tools and a bit of patience, it’s a DIY project that can be completed in a few hours.

NRH’s Gates & Garage Doors

7048 Ridge Crest Dr, North Richland Hills, TX 76182, United States

1-817-533-4913

How To Convert Garage Door Into A Wall – Tarrant County Door & Gate

By

On July 28, 2023

In Garage Door

Converting a Garage Door Repair North Richland Hills TX into a wall can be a significant home improvement project that requires careful planning and execution. Whether you want to create additional living space, improve insulation, or simply transform the appearance of your home, this process involves several steps to ensure safety, structural integrity, and aesthetic appeal.

In this comprehensive guide, we will cover the key steps and considerations involved in converting a garage door into a wall.

  1. Evaluate Local Building Codes and Permits Before starting any construction project, it’s crucial to check your local building codes and obtain the necessary permits. Garage door removal and wall construction may require specific approvals to ensure compliance with safety and zoning regulations.
  2. Measurements and Planning Begin by taking accurate measurements of the garage door opening, including width, height, and the distance to the ground. Use these measurements to determine the size and dimensions of the wall you’ll be installing. Sketch out a rough plan to visualize the final result and identify any potential challenges.
  3. Clear the Area Clear the garage space of all belongings and debris. Relocate any items that you want to keep to a safe location outside of the construction area.
  4. Remove the Garage Door Removing the garage door can be a labor-intensive task. Carefully unscrew and dismantle any hardware and tracks attached to the door. Depending on the door’s size and weight, you may need the assistance of others or specialized equipment to safely remove it.
  5. Address Electrical and Plumbing If there are any electrical outlets, switches, or plumbing fixtures located where the wall will be constructed, you need to reroute them to a suitable location. Consult with a licensed electrician and plumber to ensure proper relocation.
  6. Structural Reinforcement Since a garage door opening lacks the load-bearing capacity of a wall, you’ll likely need to reinforce the surrounding structure to support the new wall. Consult with a structural engineer or a qualified contractor to determine the appropriate reinforcement method, which may involve adding new beams or posts.
  7. Insulation and Vapor Barrier Consider adding insulation to the wall to improve energy efficiency and comfort in the new space. Install a vapor barrier to prevent moisture from seeping through the wall.
  8. Framing and Sheathing Build the framework for the new wall using pressure-treated lumber. Ensure the framing is plumb and level to maintain structural integrity. Once the framing is complete, cover it with sheathing material, such as plywood or oriented strand board (OSB).
  9. Windows and Doors If your design includes windows or doors, cut openings in the sheathing and install them securely. Ensure that the openings are properly flashed and sealed to prevent water intrusion.
  10. Exterior Finishing Match the exterior finish of your home to the new wall. This might involve applying stucco, siding, or brick, depending on the existing exterior materials. Ensure the new wall seamlessly blends with the rest of the house for a cohesive look.
  11. Interior Finishing Finish the interior of the new wall to match the existing interior of your home. This may involve drywall installation, painting, and other finishing touches.
  12. Final Inspections Before declaring the project complete, schedule inspections with the relevant authorities to ensure that the new wall meets building code standards and safety requirements.
  13. Landscaping After completing the wall conversion, you might need to address landscaping changes caused by the removal of the garage door. Consider regrading the area or adding new landscaping elements to enhance the curb appeal of your home.
  14. Safety Considerations Throughout the project, prioritize safety. Use appropriate safety gear and tools, and if you’re unsure about any aspect of the conversion, seek professional help.
  15. Utility Access Keep in mind that converting a garage door into a wall might impact future utility access to the space, such as heating, cooling, and ventilation systems. Plan accordingly to ensure these systems can still be serviced and maintained effectively.

In conclusion, converting a Garage Door Repair North Richland Hills TX into a wall is a complex and challenging undertaking. Proper planning, adherence to building codes, and attention to detail are crucial to ensure a successful and safe transformation. Always consider seeking professional assistance for the tasks beyond your expertise to achieve the best possible results.

Tarrant County Door & Gate

6408 Marlette Ct, North Richland Hills, TX 76182, Estados Unidos

817-456-2958

How Much Does New Garage Door Cost-North Richland hills Best Garage & Overhead Doors

By

On May 17, 2023

In GARAGE DOOR SUPPLIER

A new Garage Door Repair North Richland Hills TX cost can vary depending on several factors such as the type of door, materials used, size, design, additional features, and installation fees. Generally, the price range for a standard single-car garage door starts around $500 and can go up to $2,000 or more, while a double-car garage door typically ranges from $800 to $4,000 or higher.

One of the significant factors influencing the cost is the material used for the garage door. The most common materials include steel, aluminum, wood, and fiberglass. Steel doors are often the most affordable option, starting at around $500. They offer durability and require minimal maintenance. Aluminum doors are lightweight and can be cheaper than steel doors, with prices starting around $400, but they may not be as sturdy. Wood doors provide a more traditional and aesthetically pleasing look, but they tend to be more expensive, starting at around $800 and going up to several thousand dollars depending on the wood quality and design. Fiberglass doors offer the advantage of being lightweight, durable, and resistant to dents and rust. They usually range from $600 to $1,500.

The size of the garage door is another crucial factor in determining the cost. Standard single-car garage doors are typically 8 to 9 feet wide and 7 to 8 feet high, while double-car garage doors are usually 16 to 18 feet wide. Larger or custom-sized doors will cost more due to the additional materials required.

The design and style of the garage door can also affect the price. Basic, non-insulated doors are generally less expensive, while doors with insulation, windows, decorative panels, or customized designs will increase the cost. Insulated garage doors help maintain temperature inside the garage and are more energy-efficient but can be pricier, usually starting around $700.

Installation costs are usually separate from the door price and depend on factors like complexity, location, and additional services required. Professional installation can range from $200 to $600 or more, depending on the complexity of the installation process and if any modifications are needed for the garage structure.

It’s essential to consider that the prices mentioned above are rough estimates and can vary significantly depending on your location, the specific door model and brand, as well as market fluctuations. To get an accurate cost estimate, it’s advisable to contact local garage door dealers or installers, who can provide detailed pricing based on your requirements.

In summary, the cost of a new Garage Door Repair North Richland Hills TX can range from around $500 to several thousand dollars, depending on factors such as material, size, design, additional features, and installation fees. It’s always best to research and obtain quotes from multiple suppliers to find the most suitable option for your needs and budget.

North Richland hills Best Garage & Overhead Doors

North Richland Hills, TX 76182

817-533-4913

Powered by WordPress & Theme by Anders Norén