Replacing a Garage Door Repair Alpharetta GA spring can be a challenging task, but with the right tools and careful execution, you can do it yourself.

Here’s a step-by-step guide on how to replace a garage door spring:

  1. Safety first: Before you begin, make sure to take proper safety precautions. Wear safety goggles, gloves, and sturdy shoes. Unplug the garage door opener from the power source and disconnect it from the door.
  2. Identify the spring type: There are two types of garage door springs – torsion springs and extension springs. Torsion springs are located above the door, while extension springs are positioned alongside the tracks on both sides of the door. Determine which type of spring you have before proceeding.
  3. Gather the necessary tools: You’ll need a few tools to replace the garage door spring. These include a wrench, socket set, winding bars (for torsion springs), pliers, and a ladder.
  4. Release tension from the old spring: If you have torsion springs, start by releasing the tension. Insert the winding bars into the winding cone, and slowly unwind the spring. Keep a firm grip on the winding bars and take caution as the tension is released. For extension springs, you can release the tension by opening the garage door fully and securing it with clamps or vise grips.
  5. Remove the old spring: Once the tension is released, remove the spring from its brackets or mounting points. Use the appropriate tools, such as a wrench or pliers, to loosen and remove any bolts or screws holding the spring in place.
  6. Measure and purchase a new spring: Accurately measure the length and diameter of the old spring to ensure you purchase a suitable replacement. Take note of the wire size and the number of coils as well. Visit a local hardware store or contact a garage door supplier to purchase a new spring.
  7. Install the new spring: Carefully install the new spring by securing it to the brackets or mounting points. Ensure it is positioned correctly and tightly fastened.
  8. Tension the new spring: For torsion springs, use the winding bars to wind the new spring. Insert the winding bars into the winding cone and turn them in the opposite direction of how you released the tension earlier. Slowly wind the spring until it reaches the appropriate tension. Extension springs do not require tensioning.
  9. Test the door: Once the new spring is installed and tensioned, carefully remove any clamps or vise grips if you used them. Plug the garage door opener back into the power source and reconnect it to the door. Test the door by opening and closing it to ensure it operates smoothly.
  10. Regular maintenance: It’s important to perform regular maintenance on your garage door springs to prolong their lifespan and ensure safe operation. Lubricate the springs and other moving parts with a silicone-based lubricant at least twice a year.

Remember, if you are unsure or uncomfortable with any step of the process, it’s best to consult a professional Garage Door Repair Alpharetta GA technician for assistance. Garage door springs are under high tension and mishandling them can be dangerous.

Alpharetta Garage Door Repair

5200 Avalon Blvd building 5000, Alpharetta, GA 30009

1-678-379-5834